replacement of sand by marble powder in concrete

Effect of Granite Powder on Strength Properties of Concrete

as a replacement of sand used in concrete and cement was replaced with 7.5 % silica fume, 10% fly ash, 10% slag and the dosage of superplasticiser added 1% by weight of cement. The test results show clearly that granite powder of marginal quantity, as partial sand replacement has beneficial effect on the above properties.

An Experimental investigation on utilizations of Marble ...

The durability as well as workability has increased to large extent by use of marble dust as replacement of fine aggregate and coarse aggregate. The effect on properties of concrete were investigated and concluded that optimum percentage for replacement of sand with marble powder in concrete is almost 50% [1-9].

Feasibility and Need of use of Waste Marble Powder in ...

The investigation revealed that replacing of cement with marble waste powder up to 20 % reduces the slump of concrete mixes, whereas replacement of sand by marble waste powder up to 20% enhances the slump of the concrete mixes. In concrete production replacement of 5% cement by

Influence of Marble Powder Mortar and Concrete Mix

The use of waste marble powder (dust) was proposed in partial replacement of cement, for the production of Mortar and Concrete Mix. In particular, tests were conducted on the mortars and concrete mix cured for different times in order to determine their workability, flexural as well as compressive strength.

Partial Replacement of Cement With Marble Powder in Concrete

In this paper explained about the behavior of concrete with partial replacement of cement with added percentage values of marble powder and attain required strength. Partial replacement of marble powder in cement accordingly in the range of 20%, 30%, 40%, by weight for M20 grade of concrete.

Partial Replacement of Cement to Concrete by Marble Dust ...

Partial Replacement of Cement to Concrete by Marble Dust Powder and threatening both agriculture and public health. Therefore, utilization of the marble dust in various industrial sectors especially the construction, agriculture, glass and paper industries would help to protect the environment.

Investigation on Strength Properties of Concrete with ...

3.5 Marble Powder The specific gravity of marble is 2.577. Local available marble powder used as partial replacement of fine aggregate in concrete. 3.6 Granite Powder Granite belongs to igneous rock family. Granite powder obtained from the polishing units and the properties were found.

Partial Replacement of Cement with Marble Dust and Fine ...

3.Tostudythe influence of partial replacement of cement with marble powder and fine aggregates with a stone dust, and to compare it with the compressive and tensile strength of ordinary M30 concrete. 4.We are also trying to find the percentage of marble powder and stone dust replaced in …

replacement of sand by marble powder in concrete

9 Use of Marble powder and M-Sand in concrete is economical. 9 From the results, the replacement of cement with marble powder of 25% replacement gives a good Contact Supplier BEHAVIOUR OF CONCRETE BY PARTIAL REPLACEMENT OF ...

Use of Waste Marble Powder as Partial Replacement in ...

marble dust powder on the concrete mix by partially replacing cement and sand with the marble powder dust. In this project, we check the effect on mechanical and physical properties of a concrete mix if varying marble powder dust is partially replaced in the concrete mix. 1.1 Research Significance

paper presentation on cement replacement by marble powder pdf

Robo Sand Project Report Pdf in . replacement of sand by quarry dust in concrete project . literature review on partial replacement of sand using quarry dust. ... 10 %, 10% and 20% . as a partial replacement of cement and sand mix. The . marble powder as partial replacement of sand, MX2 with. ... Project On Replacement Of Sand By Robo Sand In ...

replacement sand by using stone dust in concrete ppt

Ppt On Replacement Of Stone Dust In Concrete And … quarry dust as replacement for sand in concrete Influence of Marble Powder Mortar and Concrete The equivalent mixes crushed ... granite dust in concrete DXN Mining.

Research Paper PARTIAL REPLACEMENT OF CEMENT WITH …

increased with addition of waste marble powder up to 10% replace by weight of cement and further any addition of waste marble powder the Split Tensile strength decreases. • Thus we found out the optimum percentage for replacement of marble powder with cement and it is almost 10% cement for both cubes and cylinders.

Review on the feasibility of Marble Dust as Replacement of ...

waste marble powder construction industry itself as fine aggregate replacing natural sand in concrete. The replacement is done partially and fully in the proportion 0%, 25%, 50% and and its effect on concrete properties were analyzed and outcomes that replacement of 50% of sand with marble powder is

PARTIAL REPLACEMENT OF CEMENT WITH WASTE MARBLE …

percentage for replacement of marble powder with cement and it ... with sand production. The design of concrete (M25) was done with locally available materials. Cement was replaced with replacements levels of cement (0%, 4%, 8%, 12%, 16%, and 20%). Four numbers of cubes of 150 X 150 X 150 and

replacement of sand by marble powder in concrete - BINQ Mining

May 03, 2013· Using Marble Waste Powder in Cement and Concrete Production … Replacement of sand by marble waste powder from 5-20% ranges, in concrete production, results in similar and mostly enhanced performance than the control … »More detailed

Influence of limestone waste as partial replacement ...

One mix was control (normal concrete mix), three mix incorporating lime stone waste 25%, 50% and 75% replacement from sand. Twelve mixes incorporating lime stone waste 25%, 50% and 75% replacement from sand with marble powder as additive by percent 5, 10, and 15% by cement weight.

Influence of Marble Powder Mortar and Concrete Mix

The use of waste marble powder (dust) was proposed in partial replacement of cement, for the production of Mortar and Concrete Mix. In particular, tests were conducted on the mortars and concrete mix cured for different times in order to determine their workability, flexural as …

stone powder replaces sand in construction - YouTube

Dec 13, 2018· Use of Crushed Granite Fine as Replacement to River Sand in 24 Dec 2010 Concrete is an artificial conglomerateuse of stone powder instead of sand …

Project on Partial Replacement of Cement with Marble Powder

In this project our main objective is to study the influence of partial replacement of cement with marble powder, and to compare it with the compressive and tensile strength of ordinary M20 concrete. We are also trying to find the percentage of marble powder replaced in concrete that makes the strength of the concrete maximum.

Experimental study on partial replacement of cement by ...

properties of concrete made with Marble powder and Quarry sand and to study the various important aspects such as compressive strength, flexural strength and split tensile strength of concrete prepared by using Marble powder and quarry sand and with different percentage of replacements

Study on Marble Powder as Partial Replacement of Cement in ...

waste powder up to 20% reduces the slump of concrete mixes, whereas replacement of sand by marble waste powder up to 20% enhances the slump of the concrete mixes. In concrete production replacement of 5% cement by marble waste powder gives comparable compressive and flexural strength as of marble waste free concrete

Replacement of cement and sand in concrete with Waste ...

of replacement of cement, sand and cement & sand both with marble dust powder or marble waste product in 0% and 10%. According to this graph the highest flexural strength were achieved by replacement of 10% sand with marble waste product as compared to 0% replacement of cement,sand …

Compressive Strength Characteristic of Concrete ...

increases with the increase in marble powder and stone dust. It is found that the optimum percentage replacement of cement by marble powder and sand by stone dust which gives the maximum strength for M 20 and M 30 grade concrete is 10% marble powder and 20% stone dust.

Effect on Partial Replacement of Fine Aggregate and Cement ...

replacement of cement and sand both partially & combined with the waste marble powder/waste marble granules in which, by the partial replacement of cement and sand…

marble powder instead of sand in cement concrete

marble powder instead of sand in cement concrete. benefits of marble powder used in concreteimsr. replacement from sand with marble powder as.concrete is a mixture of cement,water,sand and brokenpowder in .

Study of Partial Replacement of Cement by Marble Powder

need of use of waste marble powder in concrete production" and concluded that the investigation revealed that replacing of cement with marble waste powder up to 20% reduces the slump of concrete mixes, whereas replacement of sand by marble waste powder up to 20% enhances the slump of the concrete mixes. In

Replacement of sand by marble dust and furnace slag in ...

by replacing sand in pavement quality concrete of rigid pavement s are reported and the effect on the slab thickness of PQC pavement for the achieved strength of the concrete mixtures incorporating marble dust and furnace slag has also been studied.